papercraft | Paperized Hannibal Will Graham papertoy

Paperized Hannibal | Will Graham paper toy.
Custom model by: kuzzzma
Difficulty / Сложность: ★★☆☆☆ (2/5)
Paper / Бумага: 120gsm or higher
Time / Время: 1 hour / час
Links: A03 | Tumblr post link | Twitter post link

DON’T REPOST PDF, please link with preview only!

Papertoy of Will Graham from Hannibal tv-series, as played by Hugh Dancy. Outfut was taken from promos to season 1.

Will Graham previewWill Graham paper toy

Will Graham and Hannibal LecterWill Graham & Hannibal Lecter paper toys

Will Graham paper toy

Will Graham pattern previewWill Graham paper toy template preview

Download PDF:

Photos:

30.05.2021 Will Graham papertoy 01

30.05.2021 Will Graham papertoy 02

30.05.2021 Will Graham papertoy 03

30.05.2021 Wendigo & Will Graham

If you build it – send me a photo (put link in comment or tag me on twitter (@kuzzzma)!

How-to build:

Will Graham papertoy - How-to

  1. Print your model, usually it takes only 1 or 2 pages of A4 paper (can be printed on legal paper too with some scaling). I prefer paper with thickness of 120gsm, but regular office paper works too (for the info – it’s 80gsm thickness).
  2. Get a good glue. Usually PVA glue is recommended for papercraft, but in some parts of the world getting a decent PVA glue is unexpectedly tricky – a normal liquid clear glue is fine too. Glue in a stick won’t work though – details of paper toys are too small to use it. I prefer to apply glue with wooden toothpicks.
  3. I recommend scoring future fold lines on the uncut page (indicated on how-to pic) with pointed but blunt instrument (empty pen, knitting needle…)
  4. Then cut all the details, as some details are small – you may have to use smaller scissors.
  5. Fold all pieces.
  6. Assemble head, put it aside.
  7. Glue front piece of hair to it’s back part. Back part is made larger intentionally, to allow some margin of error here. Cut excess paper. Put aside.
  8. Assemble main body.
  9. There is an “extra body piece” that goes to close the gap between legs – it can be challenging it glue in (I use pincers to hold it in place), but it can be skipped and your figure will still look great.
  10. Assemble hands, put them aside.
  11. Put together coat.
  12. Assemble figure stand.
  13. TIP: If you want your paper toy to look really polished and tidy – carefully color white edges of the papertoy in corresponding colours (or in black). I also color back of jacket. Any paint or marker can be used. This instantly elevates figure and also can be used to hide any build imperfections.
  14. Time to put it all together. Recommended order:
    1. Glue body to figure stand.
    2. Attach coat to top of the body.
    3. Glue in hands to the coat. Good position for hands – 0,5cm (0.2 inch) from the neck on the sides of the body.
    4. Glue in head.
    5. Glue in front piece of hair to the head. It’s designed to stand out at the top over the main head piece. Put glue only on the top edges of the face plate (zone indicated in blue on how-to pic).
  15. All done!
Series Navigation<< papercraft | Paperized Hannibal Lecter (grey suit) papertoypapercraft | Paperized Hannibal Wendigo papertoy >>
Tagged , , , , , , , , , , . Bookmark the permalink.

About kuzzzma

Artist, photographer, papercraft designer, doll and action figures collector, traveller. Speaking Russian and English.

Leave a Reply